Honeywell Lynx Touch 5100 Frequently Asked Questions Manual

Also see for LYNX Touch 5100: Programming guide

Contents

Honeywell Lynx Touch 5100 Frequently Asked Questions Manual Manual pdf 4 page image

Return to Table of Contents - 4 - Updated: 11/22/13FAQ’sWiFi CommunicatorWiFi General information• Works with the Honeywell WAP-PLUS.• Will not work with the Honeywell WAP or the Sercom router sold under Honeywellbrand through ADI (The Sercom routers broadcast wirelessly on channel 6 and can’t bealtered. The Honeywell WAP also uses channel 6 and can’t be changed. Thisinterference prevents them from working)• Rev 5.00000 panels do not support wps enrollment.• Rev 6.00000 panels support wps enrollment w/ wifi cards rev 4.7.8+• The CRC of the Wifi module should be 4 digits. If your module shows less than 4digits, precede it with zero’s.Compatible Routers ListBrand Model TypeASUS RT-N10 Wireless N150 RouterBelkin F6D3230-4 Dual-Band Wireless A+G RouterBuffalo Technology WCR-GN Wireless N150 RouterWHR-HP-GN Wireless N150 RouterCisco/Linksys E1000 Wireless N RouterE1500 Wireless N RouterD-Link DIR-601 Wireless N150 RouterDIR-815 Wireless N Dual Band RouterLevelOne WBR-6020 Wireless N RouterNetgear WNR1000v3 Wireless N150 RouterWNR2000v3 Wireless N300 RouterTRENDnet TEW-652BRP (652) Wireless N RouterHoneywell WAP-PLUS Wireless Access PointWiFi Alarm Reporting• After 1 hour of AC loss, the WiFi module shuts down to preserve battery.• If router is down, reports then go over GSM APL (Advanced Protection Logic) will still work, If there is asmash and grab event, the WiFi module will respond to the increased supervision, thus not creating the newAPL possible trouble alarmWhat is the Range?• The range of the WiFi is dependent on your router and environment.Will it work off a WIFI extender?• Yes, With a Wifi range extender, that is broadcasting a SSID and can generate an ip address.• Yes, With a WREX Wi-Fi Repeater Extender, after the WREX has been enrolled into a WAP-Plus.