Honeywell Lynx Touch 5100 Frequently Asked Questions Manual

Also see for LYNX Touch 5100: Programming guide

Contents

Honeywell Lynx Touch 5100 Frequently Asked Questions Manual Manual pdf 8 page image

Return to Table of Contents - 8 - Updated: 11/22/13FAQ’sZ-WaveZ-wave Device support• Will work with same Z-wave devices specified in Tuxedo, see Tux User Guide or L5100 Home Automationguide for compatible list.• Inclusion device support - GE, Aspire, and Leviton.How do I Flash lights on an event (like burglary)?• Z-wave does not support flashing of lights.• The Fortrezz Z-wave Strobe/Sounder can be used on the L5100 when included into the Z-wave controller.How do you back up Z-wave information?• Z-wave information is uploaded into Compass, so it can be used to recreate the scenes, rules and schedulesoriginally created if necessary.• Use a secondary controller, connected to a laptop (such as the Leviton USB device), save the information to afile.Can the Duress code be used to unlock the door and disarm thesystem?• Yes, if enabled in user code programming.If there is a Z-wave system, and someone moves a device (lamp moduleor other), how do you “repair” the network so that the device stillreports into and can be controlled from the system?• L5100 has a Z-wave self-repair function.Z-wave devices• Primary controller is the only controller to include devices• Nodes start at 1 (primary controller), and go to 232.• If you include and exclude the same device 232 times, you will run out of nodes, and the controller will thenrestart and fill open nodesCan you learn a L5100 into another L5100 as a secondary controller• No, this is not a feature of the L5100

/ 11

Related manuals for Honeywell LYNX Touch 5100