Honeywell Lynx Touch 5100 Frequently Asked Questions Manual

Also see for LYNX Touch 5100: Programming guide

Contents

Honeywell Lynx Touch 5100 Frequently Asked Questions Manual Manual pdf 6 page image

Return to Table of Contents - 6 - Updated: 11/22/13FAQ’s• If problems are encountered when trying to enroll the WiFi module or if there is a problem in maintaining thewireless connection with a router not found on this list, a Honeywell WAP-PLUS can be used in conjunctionwith the existing router.What to do if the L5100 wifi stops responding to the Customers Router.If your customer is experiencing issues where the L5100 Wi-Fi stops responding to the router or ifthe customer’s wireless router is reset and the L5100 Wi-Fi does not reconnect back to thecustomer’s router.• Reset the L5100 panel – see section below, How do you reset the L5100 without powering down the system?• KEEP IN MIND THERE ARE MANY VARIABLES IN MAINTAINING A WIFI CONNECTION ANDWE SHOULD NOT NEGLECT BASIC TROUBLESHOOTING PROCEDURES, SUCH AS:.1. Does the Wifi module have sufficient RSSI and is within the suggested range of the access point?2. If the WAP-Plus is being used, did you ensure it is not potentially causing a conflict with the networkAccess point?3. Does the premise have reliable internet service? Are other WiFi peripherals having a problem maintainingconnection?4. Could problem be due to the environment or from other things transmitting RF energy, ie, a microwaveoven?TabletCOBY KYROS MID-7h Tablet General Information• Does not support programming modes (Master user screen, Installer program screens, and Advanced Z-wavescreens)• Can be used with Tuxedo• Can be learned in many panels (vacation and main home)• App available on Getjar app store.IPad, Iphone, Ipod touch General information.• Does not support programming modes (Master user screen, Installer program screens, and Advanced Z-wavescreens)• Can be used with Tuxedo• Can be learned in many panels (vacation and main home)When can a dealer install the MID-7H / Ipad, Iphone, Ipod touch?If there is no CS monitoring?• Yes, but they need to install a L5100-Wifi card or iLP5 and program it in the “Communicator” screen. Do notenter any CS ID, City ID, or acct id information. In Reporter, ensure Communicator type is set to “None”.