Honeywell LYNX User Manual

Also see for LYNX Touch Security System: Programming guide User guide Quick guide User guide User guide

Contents

Honeywell LYNX User Manual Manual pdf 9 page image

– 9 –QUICK VIEW OF SYSTEM FUNCTIONSQUICK VIEW OF SYSTEM FUNCTIONSQUICK VIEW OF SYSTEM FUNCTIONSQUICK VIEW OF SYSTEM FUNCTIONSSECURITY FUNCTIONSChecking system status: ............................................. Select “System” icon.To arm in STAY mode: .............................................. Select “Stay” icon then enter Code.To restart exit delay: ................................................... Select “Restart Exit Delay” icon.To arm in AWAY mode: ............................................. Select “Away” icon or depress “Away” key then enterCode.To arm INSTANT: ...................................................... Set “Delay” to ”Instant” . Select “Stay” or “Away” iconor “Away” key then enter code.To arm if Quick Arm* is active: .................................... Select “Stay” or “Away” icon or “Away” key followedby Quick Arm tab on the touchscreen.* User code is not required if Quick Arm is active.To disarm system and silence alarms:......................... Depress “Off’” key or “Disarm” icon and enter CodeNote: During Entry Delay or when an Alarm Condition exists, the LYNX Touch can be disarmed by entering the UserCode. Entering the OFF key is not requiredTo bypass a zone(s): .................................................. Select “Zones” iconTo turn Chime mode on or off: .................................... Select “Settings” iconMESSAGE CENTERTo record a message: ................................................. Select “Message” iconVOLUME ADJUSTMENTTo adjust volume: ........................................................ Select “Settings” iconTo restore/unmute user announcements: .................... Select “Settings” iconSPEAKER PHONE OPERATIONTo enter speaker phone mode: .................................... Select “Phone” IconTo enable/disable (toggle) ringer: ................................ Select “Settings” iconOTHER FUNCTIONS (accessible to the Master User only)To set the time and date: ............................................. Select “Date Time” icon (on Master User Menu)To set scheduling:........................................................ Select “Schedules” icon (on Master User Menu)To activate/deactivate devices: .................................... Select “Devices” icon (on Master User Menu)To add/delete a user code* (except Master Code):...... Select “Users” icon (on Master User Menu)* Only the master code can be used to add or delete another user code.To turn Test mode On or Off:....................................... Select “Test” icon (on Master User Menu)To view system events:................................................ Select “Events” icon (on Master User Menu)To program or delete “Follow Me” Reminders: ............ Select “Reminders” icon (on Master User Menu)