Honeywell LYNX User Manual

Also see for LYNX Touch Security System: Programming guide User guide Quick guide User guide User guide

Contents

Honeywell LYNX User Manual Manual pdf 25 page image

– 25 –SECURING THE PREMISESSECURING THE PREMISESSECURING THE PREMISESSECURING THE PREMISESDisarming the SystemSelect the “Disarm” icon or the “Off” key to disarm the system and to silence alarm andtrouble sounds. See the SUMMARY OF AUDIBLE NOTIFICATION section for information,which will help you to distinguish between fire and burglary alarm sounds. During EntryDelay or when an Alarm Condition exists, the system will be disarmed as soon as the correctuser code is entered on the touchscreen. Selecting the OFF key is not required. The entrybeeps or alarm sound can be silenced by pressing any key however, it will restart in 10seconds if the correct User Code is not entered. The READY indicator will light (if no alarmshave occurred while armed) and the control will beep once to confirm that the system isdisarmed.**IMPORTANT**If the LYNX Touch is beeping rapidly upon entering the premises, an alarm has occurredduring your absence and an intruder may still be on the premises. LEAVE IMMEDIATELYand CONTACT THE POLICE from a nearby safe location.Disarming the system and silencing alarmsArmed: StayMore10:18 AM June 8, 20105000-100-056-V0ZonesMessageSystemDisarm Phone1. Select the “Disarm” icon or depress the“Off” key. The system will beep once anddisplay a keypad.Armed StayEnter Code:Cancel2 315 6408 97Clear5000-100-065-V02. Enter a valid Code. The system will beeponce and announce“Disarmed Ready toArm”.Note: If a valid user code is not entered or theConfirm icon has not been selectedwithin 30 seconds, the system will returnto the “home” screen and it will not bedisarmed.If an invalid User Code is entered, system will return to the home screen.