Honeywell LYNX User Manual

Also see for LYNX Touch Security System: Programming guide User guide Quick guide User guide User guide

Contents

Honeywell LYNX User Manual Manual pdf 31 page image

– 31 –SECURING THE PREMISESSECURING THE PREMISESSECURING THE PREMISESSECURING THE PREMISESChime ModeChime ModeYour system can be set to provide you with an audible alert of the opening of a door, while itis disarmed, by using Chime mode. When activated, three beeps will sound at the controlwhenever a protected perimeter door is opened and the zone voice descriptor will beannounced. Additionally, the faulted zone information will be displayed on the home screen.Selecting the “Zones” icon displays the open protection points. The Chime mode can beturned on only when the system is disarmed.Turning Chime mode On or OffArm AwayReady To ArmArm StayBackDelaySettings10:18 AM June 8, 20105000-100-007-V0Tools1. With the system in the disarmed or armedstate, select the “Settings” icon from thesecond page of the Home Screen. Thesystem displays the Setting screen.Ready To ArmRingerChimeVoiceBrightnessContrastVolumeOff5000-100-008-V0Off Off Save2. Select the “Chime” icon. The system willtoggle between “Off” and “On”. When “On” isselected, the Chime mode will be active.3. Select the “Save” button to save your newsettings.