Honeywell LYNX Touch Series Installation And Setup Manual

Also see for LYNX Touch Series: User guide Guide Installation and setup guide Programming guide Quick installation guide

Contents

Honeywell LYNX Touch Series Installation And Setup Manual Manual pdf 16 page image

LYNX Touch Installation and Setup Guide- 16 -Mechanics of ProgrammingThe second page also displays the system status in and six selection “buttons” and “tabs”.Selection FunctionTools Provides access to Installer and User Programming Menus (Master User Code required for access).Arm Away Used to Arm the system in Away mode (displayed on both Home Screen pages).Arm Stay Used to Arm the system in Stay mode (displayed on both Home Screen pages).Settings Provides access to various keypad functions (i.e.; Brightness, Contrast, Volume, Voice, Chime & Ringer).Delay/Instant Used to toggle between exit delay and instant arming options (displayed on both Home Screen pages).Back Returns system to first page of the Home Screen.Installer Tools MenuThe Tools/Installer Menu provides access to the Installer configurable features and displays six options.Entering the Installer Code is required to access the Installer Menu.Note: For information regarding the Devices, Events and Schedules programming screens, refer to the UserManual.Ready To Arm5000-100-043-V0ProgramEventsSchedulesTestInitiateDownloadDevicesInstaller Menu PageUser Tools MenuThe User Menu provides access to the User configurable features and displays eight options. Entering theMaster User Code is required to access the User Menu.Slide ShowDate TimeReady To ArmEventsBackRemindersTestSchedulesDevicesUsers5000-100-070-V0User Menu PageGeneral Programming InformationWhen power cycling the control, remove AC power first and wait approximately 1 minute beforedisconnecting battery.Programming options are stored in non-removable, electrically erasable, nonvolatile EEROM memory. Thesystem can be programmed at any time, even at the installer's premises prior to the actual installation.Simply apply power temporarily to the Control and then program the unit as desired.The “Initiate Download” button is used to initiate remote programming using an IBM PC compatiblePersonal Computer, and Compass Downloader and modem or via capable GSM or IP communicationsmodules. See the Remote Programming/Control (Downloading) section for additional information.WWW.DIYALARMFORUM.COM