Honeywell LYNX Touch Series Installation And Setup Manual

Also see for LYNX Touch Series: User guide Guide Installation and setup guide Programming guide Quick installation guide

Contents

Honeywell LYNX Touch Series Installation And Setup Manual Manual pdf 15 page image

LYNX Touch Installation and Setup Guide- 15 -Mechanics of ProgrammingNavigating MenusTouch-screen DisplayLYNX Touch’s Liquid Crystal Display (LCD) touch-screen displays variable icons and text on “screens”. Thescreen displays status icons and associated text, the current time, system status information and menuchoices. The Menu area includes a list of commands, or choices that apply to the current selection. Thestatus area provides information about various system events and a colored bar also provides an indicationof system status. A “Home Screen” is displayed whenever power is applied to the system. In addition thegreen “READY” LED is lit when the system is ready or flashes when it is not.ZonesArm AwayReady To ArmArm StayMoreDelayPhone10:18 AM June 8, 20105000-100-054-V0MessageSystemARMED READYSYSTEMSTATUSSYSTEM/ZONESTATUSFUNCTIONKEYSLEDsHome Screen (page 1)Navigation KeysNavigating through the screens is accomplished by lightly touching the menu item on the touch-screen.Once activated, the control will take you to the next screen. Selecting the “Home” (cancel) key or the “2”Key will return you to the previous screen at any time unless System Programming mode is active. ByTouching (selecting) an icon or key the system, depending on the function, advances to another screen,toggles between options or scrolls through multiple options that can be selected. The system provides aprompt when a specific input is required.Note: You may find it convenient to adjust the volume setting before entering the Program Mode. This will allow you to clearly hearthe feedback announcements or system beeps from the system’s built-in speaker. To adjust the volume, select “More” on the“home Screen” and then select “Settings”. Adjust the volume using the slide displayed on the Settings screen and then select“Save” to accept. Upon exiting the Program Mode, the system resets the volume to the default value (mid level).Menu ScreensSystem Status is displayed at the top of each screen. The time and date are displayed at the bottom of theHome Screen. The Home Screen consists of two pages. The first page displays the system status and eightselection “buttons” and “tabs”.Selection FunctionZones Provides access to Zone information and options.System Provides information about system statusArm Away Used to Arm the system in Away mode (displayed on both Home Screen pages).Arm Stay Used to Arm the system in Stay mode (displayed on both Home Screen pages).Message Provides access to Message Center.Phone Provides access to Speaker Phone mode. (if programmed)Delay/Instant Used to toggle between exit delay and instant arming options (displayed on Home Screen pages).More Advances system to second page of the Home Screen.WWW.DIYALARMFORUM.COM