INTRODUCTION EXCEL CARE CONTROL ICONS74-5577–33 (US) 14EN2B-0184 GE51 R0518 (Europe)Control Icon Table (Excel Web / Excel Web II)This chapter lists icons alphabetically by function name and includes functionnames, the previous function name, in which folder it can be found, and shortdescriptions. Function name is usually the same as the icon name.Function Name Previous Function name Folder DescriptionAbsolute Arithmetic Returns the absolute value.Addition Add Arithmetic Sum up the input values.ADH2 ADH2 Legacy XL500 Legacy RACL function: Adapts the slope S ofthe heating curve for the determination of theflow temperature setpoint to the buildingcharacteristics.AND Logic AND output becomes TRUE(1) if all inputsare TRUE(1). NAND output is the invertedAND output.Arcus Cosinus Arithmetic Calculates the arcus cosinus function of X.Arcus Sinus Arithmetic Calculates the arcus sinus function of X.Arcus Tangems Arithmetic Calculates the arcus tangens function of X.Average AVR Arithmetic Calculates the average of input values.CAS Plus Cascade controller Controller Cascade controller that acts as a PIcontroller with a master and cascadecontroller.Compare2 (Excel Web II with OS3.01.00 or higher only)Comparison Compares two analog inputs (A and B).Comparison Comparison Compares input A and B.Cosinus Arithmetic Calculate the cosinus function of X in rad.Counter Misc Increments the output Y by 1 when input "X"changes from 0 to 1. The counter is set to 0,when "Reset" input becomes TRUE (1).Cycle Cyclic timer Timer Outputs an alternating value.Decimal Places Arithmetic Returns the decimal places value of the input(3.175 => 0.175).Delay Misc Switch-on delay of input A to Y. if input "A" isunequal to "B" within delay time, then Alarmoutput = TRUE (1).Dewpoint Misc Calculates the dewpoint temperature fromthe absolute humidity.
