IJ40-0012-494127762B/B11/24/200649Envelope moistener7. ENVELOPE MOISTENERYour WJ 65/95/110 Postage Meter used in conjunction with aMoistener Unit will seal and print envelopes in a single operation.The moistener may be set to non-seal mode if sealing is notrequired enabling the unit to be used as a normal feed platform.If seal only is required, the postage meter mode may be set toSEAL ONLY (please refer to PRINTING OPTIONS).The Moistener Unit may be used with an Autofeed Unit or with theHand Feed Platform.7.1 Using the Envelope Moistener with Plain PlatformSet the Moistener ON/OFF control to (ON).Press the button, after a short pause the motor will start.Each envelope must be fed into the moistener unit with the flapdownwards and top edge against the platform mail guide. A twohanded approach is preferable with particular attention being paidto keeping the envelope flat.A continuous sliding action is made until the envelope contacts thepostage meter rollers. The envelope will be drawn through thepostage meter and deposited into the receiving tray.7.2 Using the Envelope Moistener with an AutofeedSet the Moistener ON/OFF control to (ON).Load the Autofeed Platform as detailed in "Postage printing withautofeed".Press the button, after a short pause the motor will start andsealed envelopes will be deposited into the receiving tray.
