Dolphin® 9500 Series User’s Guide 14 - 114 Dolphin 9500 Series ChargeBaseOverviewThe Dolphin ChargeBase is a four-slot charging cradle that can power four Dolphin terminals, and charge their main batteries inless than four hours.ChargingThe Dolphin ChargeBase completes a full charge of the main battery pack in less than four hours. The ChargeBase also providespower to the intelligent battery charging system in all Dolphin terminals that senses when a full charge has been achieved andswitches to a trickle charge to maintain the full charge.As battery packs charge, the charging circuitry follows the two-step charging process (CC-CV) that is recommended for Li-Ionbatteries. The process monitors changes in temperature, current, and voltage.Convenient StorageIntelligent battery charging makes the Dolphin ChargeBase a safe and convenient storage receptacle for your Dolphin terminal.CapacityThe ChargeBase can hold up to four Dolphin 9500 Series terminals. Each charging slot charges each terminal independently ofthe other slots.Use only Dolphin 9500 Series peripherals, power cables, and power adapters. Use of peripherals, cables, or poweradapters not sold/manufactured by Hand Held Products will void the warranty and may damage the terminal.Use only the Li-ion battery packs provided by Hand Held Products. The use of any battery pack not sold/manufacturedby Hand Held Products in Dolphin 9500 Series terminals will void your warranty and may result in damage to the Dolphinterminal or battery.Dolphin ChargeBase Parts and FunctionsFront PanelTerminal WellsThe ChargeBase contains four terminals wells. Each well• Holds and charges the main battery pack of one Dolphin terminal.• Contains the companion to the industrial-grade, 17-pin connector on the bottom panel of Dolphin terminals.• Has two LEDs on the front: the Dock LED and the Charge LED.!!ChargeLEDDockLEDTerminal Wells
