Garmin GPSMAP 60Cx Owner's Manual

Also see for GPSMAP 60Cx: Declaration of conformity Specification Owner's manual Quick start guide Guide de l'utilisateur

Contents

Garmin GPSMAP 60Cx Owner's Manual Manual pdf 89 page image

GPSMAP 60Cx Owner’s Manual 79APPENDIX >Connecting Your GPSMAP 60Cx to aComputerYou can connect your GPSMAP 60Cx to yourcomputer using either a serial port or USB connectorcable.NOTE: Fully install the supplied MapSourceprogram, Trip & Waypoint Manager, on yourcomputer before connecting the USB cable to thecomputer.To connect your GPSMAP 60Cx to yourcomputer:1. Lift the USB protective cover from the backof the GPSMAP 60Cx and insert the smallerconnector on the USB cable into the matchingport.2. Connect the remaining cable end to yourcomputer's USB port.To connect to your computer using a SerialPort connector:1. Lift the Serial Port protective cover from theback of the GPSMAP60CSx and insert theround indexed connector on the cable into thematching port.2. Connect the remaining cable end to your PCSerial port or other appropriate device.3. Set your GPSMAP 60Cx interface settingto the appropriate interface format. Refer toInterface Setup on page 58.Information About USB DriversThe USB drivers should have been automaticallyinstalled when you installed the MapSource programthat came with your GPSMAP 60Cx. When youinitially connect the GPSMAP 60Cx to a USBport, your computer might prompt you to locate thedestination of the drivers for the device. You onlyneed to install the drivers once. After the drivers areinstalled, your computer will always detect yourGPSMAP 60Cx when it is connected. USB driversmight be updated periodically. You can find updates atwww.garmin.com.