Garmin GPS 400W Installation Manual

Also see for GNC 420AW: Maintenance manual Pilot's guide addendum Quick reference guide Pilot's Guide & Reference Pilot's Guide & Reference

Contents

Garmin GPS 400W Installation Manual Manual pdf 88 page image

Page 5-10 GNS 400W Series Installation ManualRev. G 190-00356-08AIR/GROUNDWhen HELICOPTER is selected as airframe type, the AIR/GROUND option will be available.Select Air/Ground in the AIR/GROUND field to enable ordisable the air/ground option.Selection DescriptionEnabled The Air/Ground input is enabled.Disabled The Air/Ground input is disabled.5.3.4 MAIN INPUTS 1 PageSelect the MAIN INPUTS 1 Page (see Figure 5-8). This page(along with the MAIN INPUTS 2 Page) allows you to monitorthe data on ARINC 429, RS-232 and other electrical inputs.This is used for verifying electrical interfaces duringinstallation and troubleshooting. Information that is not beingreceived by the 400W Series unit is dashed out.Field DescriptionOAT Outside Air TemperatureSAT Static Air TemperatureTAT Total Air TemperatureIAS Indicated AirspeedTAS True AirspeedWSPD Wind SpeedHDG Heading (True or Magnetic)WDIR Wind DirectionB ALT Barometric-corrected AltitudeD ALT Density AltitudeP ALT Pressure AltitudeFigure 5-7. MAIN SYSTEM CONFIG PageFigure 5-8. MAIN INPUTS 1 Page