Garmin DriveSmart™ 50LM 212 Press the mount ② onto the suction cup ③until it snaps into place.3 Press the suction cup to the windshield,and flip the lever ④ back toward thewindshield.4 Fit the tab on the top of the mount intothe slot on the back of the device.5 Press the bottom of the mount into thedevice until it clicks.6 Plug the other end of the vehicle powercable into a power outlet in your vehicle.Turning the Device On or Off• To turn the device on, press the power key,or connect the device to power.• To put the device in power saving mode,press the power key while the device is on.While in power saving mode, the screen isoff and the device uses very little power,but it can wake instantly for use.TIP: You can charge your device faster byputting it in power saving mode whilecharging the battery.• To turn off the device completely, hold thepower key until a prompt appears on thescreen, and select Off.The prompt appears after five seconds.If you release the power key before theprompt appears, the device enters powersaving mode.Acquiring GPS SignalsWhen you turn on your navigation device,
