GE JCB560 Owner's Manual

Also see for JCB560: Owner's manual

GE JCB560 Owner's Manual Manual pdf 33 page image

33The Ceramic Cooktop Scraper andall recommended supplies areavailable through our dealers orthrough a Mabe Canada Parts Store.NOTE: Do not use a dull or nicked blade.Use a Cleaning Pad for CeramicCooktops.Clean your cooktop after each spill.Use Ceramic Cooktop Cleaner.WARNING: DAMAGE to yourglass surface may occur if you use scrubpads other than those recommended.Allow the cooktop to cool.Spread a few drops of CeramicCooktop Cleaner on the entire burnedresidue area.Using the included Cleaning Pad forCeramic Cooktops, rub the residuearea, applying pressure as needed.If any residue remains, repeatthe steps listed above as needed.For additional protection, after allresidue has been removed, polishthe entire surface with CeramicCooktop Cleaner and a paper towel.Cleaning the glass cooktop. (on radiant models) GEAppliances.caNormal Daily Use CleaningONLY use Ceramic Cooktop Cleaner onthe glass cooktop. Other types of cleanersmay not be as effective.To maintain and protect the surface ofyour glass cooktop, follow these steps:Before using the cooktop for thefirst time, clean it with CeramicCooktop Cleaner. This helps protectthe top and makes cleanup easier.Daily use of Ceramic Cooktop Cleanerwill help keep the cooktop lookingnew.Shake the cleaning cream well.Apply a few drops of Ceramic CooktopCleaner directly to the cooktop.Use a paper towel for CeramicCooktops to clean the entire cooktopsurface.Use a dry cloth or paper towelto remove all cleaning residue.No need to rinse.NOTE: It is very important that you DO NOTheat the cooktop until it has been cleanedthoroughly.Burned-On ResidueAllow the cooktop to cool.Use a single-edge razor blade scraperat approximately a 45° angle againstthe glass surface and scrape the soil.It will be necessary to apply pressureto the razor scraper in order toremove the residue.After scraping with the razor scraper,spread a few drops of CeramicCooktop Cleaner on the entire burnedresidue area. Use the Cleaning Padto remove any remaining residue.For additional protection, after allresidue has been removed, polishthe entire surface with CeramicCooktop Cleaner and a paper towel.Heavy, Burned-On ResidueSafety Instructions Operating Instructions Care and Cleaning Troubleshooting Tips Consumer Support