306.1. IMB Network SetupTo edit the IP addresses of the Ethernet ports, use the following instructions:1. Enter the SMS screen.2. Click [Configuration] to access the Configuration page.3. Select Maintenance access from the top drop down menu. Enter the numberpassword and select [OK]4. Select the IMB Network tab5. Enter the Subnet Mask. As well as the desired IMB IP and SOM IP addresses(please refer to Figure 33).Figure 33 IMB Network Tab [Configuration].6. Once the settings have been entered, click on [Validate IPs].7. If all of the IP addresses are valid, you will get the following pop-screen as follow:Figure 34 Confirm IPs are valid.8. Click [OK] to exit.
