295.5. Increase Rebuild SpeedIf the RAID array is being rebuilt during playback, the rebuild speed will slow down significantly.To resume highest rebuild speed after playback is finished, go to AdminPanelLoginStorage System Management menu (please refer to Figure 32). Then, clickIncrease Rebuild Speed button. This will immediately set RAID array to rebuild at highest speed.Figure 32 Increase Rebuild Speed [Storage System Management].5.6. Disabled options when using the 1x eSATAConnectionThe following options are disabled when using the PSD-3000-P (1x eSATA) content option: Add Disk to RAID Array – This is done automatically. Import RAID Array – No longer necessary Remove Disk from RAID Array – No longer necessary6. SX-3000 IP SetupThe IP address of the SOM and SX-3000 IMB will need to be set for proper operation. The SOMand the IMB IP are to be on the same subnet.
