224.6. eSATA Connection to the SX-30004.6.1. eSATA Connection on the PSD-3000-P1. Take out the adapter from the packaging and connect to the DC power connector.2. Connect the eSATA cable to the back panel for data transfer.Figure 26 Connect eSATA cable to PSD-3000-P.Step 2 Making the connections to the SX-30001. Insert the eSATA cable into the SX-3000 eSATA port 1.Figure 27 Insert eSATA cable into SX-3000 eSATA port 1.NOTE: To use PSD-3000-P as the content source, it MUST be connected to the port 1 of the eSATAconnection of the SX-3000 board.
