Canon imagePROGRAF iPF8300 Basic Guide No.2 Basic Manual

Also see for imagePROGRAF iPF8300: Brochure Troubleshooting guide Troubleshooting guide Brochure Setup guide

Contents

Canon imagePROGRAF iPF8300 Basic Guide No.2 Basic Manual Manual pdf 50 page image

50Error MessagesError Message Cause Corrective ActionThe roll is empty. The roll is empty. Follow these steps to replace the used roll with a newroll of the same type and size.Lift the Release Lever and remove the roll.1.Load the new roll.2.If no barcode was printed on the roll, specify thetype of paper.3.When you have selected ManageRemainRoll >On in the control panel menu and a barcode is notprinted on the roll, also specify the paper length.4.(→ , Removing the Roll from the Printer)(→"Removing the Roll Holder from Rolls," UserManual)(→ , Attaching the Roll Holder to Rolls)(→ , Loading Rolls in the Printer)(→"Specifying the Paper Length," User Manual)(→"Changing the Type of Paper," User Manual)If Not finished printing. Finish printingremaining jobs? is shown on the Display Screen,press the OK button.5.Printing will resume, starting from the page onwhich the error occurred.There is remaining roll paper, butbecause it could not be advanced,it could not be detected.Choose a higher level of Print Quality in theAdvanced Settings of the printer driver.(→"Giving Priority to Particular Graphic Elements andColors for Printing," User Manual)Roll printing is selected. You have attempted to print on aroll, but no roll is loaded.Press ▲ or ▼ to select Load Roll Paper, and thenpress the OK button. Load the roll, and then print.Press ▲ or ▼ and select Stop Printing or press theStop button to stop printing.(→ , Attaching the Roll Holder to Rolls)(→ , Loading Rolls in the Printer)Roll printing is selected, butsheets are loaded.A print job for rolls was receivedwhen a sheet is loaded.Press ▲ or ▼ to select Stop Printing, and then pressthe OK button to stop printing.Press ▲ or ▼ to select Eject Paper, press the OKbutton, and remove the sheet.(→ , Removing Sheets)Load a new roll.(→ , Loading Rolls in the Printer)Follow these steps to load and print on a roll.The printer now starts printing the print job.1.2.

/ 52

Related manuals for Canon imagePROGRAF iPF8300