Canon imagePROGRAF iPF8300 Basic Guide No.2 Basic Manual

Also see for imagePROGRAF iPF8300: Brochure Troubleshooting guide Troubleshooting guide Brochure Setup guide

Contents

Canon imagePROGRAF iPF8300 Basic Guide No.2 Basic Manual Manual pdf 41 page image

41Error MessagesError Message Cause Corrective ActionMail box full. Now printingwithout saving data.No more space is available on theprinter's hard disk, so jobs are nowprinted without saving them. (Printjobs can no longer be saved on thehard disk.)After printing, this message is cleared.Maximum jobs stored. 100 jobs are stored in the personalbox.Delete unneeded jobs stored in personal boxes.(→"Deleting Saved Jobs," User Manual)Execute printhead cleaning. The Printhead nozzles areclogged.Follow these steps to clean the Printhead.If this message is still displayed, replace thePrinthead.Cannot adjust printhead. The Printhead nozzles areclogged.Execute Head Posi. Adj. again, as follows.Press the OK button to clear the error.1.Print a test pattern to check the nozzles.2.Clean the Printhead if the nozzles are clogged.3.Execute Head Posi. Adj. again.4.The Printhead cannot be aligned;highly transparent film is loaded.Press the OK button to clear the error.(→"Checking for Nozzle Clogging," User Manual)(→ , If Vertical Lines are Warped or Colors areMisaligned)(→ , If Printing is Faint)(→ , If Vertical Lines are Warped or Colors areMisaligned)We recommend using a type of paper that you oftenuse, other than film, for Printhead adjustment.Stop printing by pressing ▲ or ▼ to select StopPrinting.Clean the Printhead.2.1.(→ , If Printing is Faint)(→ , Replacing the Printhead)Press ▲ or ▼ to select Print, and then press the OKbutton to resume printing. However, note that thiserror may affect the printing quality.If OK is shown on the Display Screen, clean thePrinthead.If this message is still displayed, replace thePrinthead.Clean the Printhead.2.(→ , If Printing is Faint)(→ , Replacing the Printhead)Press the OK button on the Control Panel to stopprinting.1.Delete unneeded jobs stored in personal boxes (boxnumbers in the range 01–29).(→"Deleting Saved Jobs," User Manual)