Canon imagePROGRAF iPF8300 Basic Guide No.2 Basic Manual

Also see for imagePROGRAF iPF8300: Brochure Troubleshooting guide Troubleshooting guide Brochure Setup guide

Contents

Canon imagePROGRAF iPF8300 Basic Guide No.2 Basic Manual Manual pdf 48 page image

48Error MessagesError Message Cause Corrective ActionPaper position not suitable forborderless printing.Because paper expands orcontracts depending on theenvironment of use, it maybecome narrower or wider thanthe supported width for borderlessprinting.Press ▲ or ▼ to select Stop Printing, and then pressthe OK button to stop printing.Select None when you have set Detect Mismatch inthe Control Panel menu to Warning.Use each type of paper only where the recommendedenvironmental conditions are met. For details onenvironmental conditions for various paper, see thePaper Reference Guide.Select None when you have set Detect Mismatch inthe Control Panel menu to Warning.PaprWidth Mismatch When Detect Mismatch in theControl Panel menu is set toPause or Warning, the width ofthe loaded roll does not match thewidth specified in Fit Roll PaperWidth in the printer driver.Press ▲ or ▼ to select Print, and then press the OKbutton to resume printing.However, note that this error may cause paper jamsand affect the printing quality.Press ▲ or ▼ to select Print With Border, andthen press the OK button to continue printing. Thedocument will be printed with a border.(→"Types of Paper," User Manual)However, note that this error may affect the printingquality.The paper is loaded askew. Press ▲ or ▼ to select Change Paper and straightenthe paper so that the edges are between the inkgrooves for borderless printing.Insert the roll firmly until it touches the flange of theRoll Holder.(→ , Attaching the Roll Holder to Rolls)However, note that this error may affect the printingquality.Make sure the roll width selected in the dialog boxdisplayed when you select Fit Roll Paper Width inthe printer driver matches the width of the roll loadedin the printer, and then try printing again.Press ▲ or ▼ to select Stop Printing, and then pressthe OK button to stop printing.Follow these steps to replace the roll to match thewidth specified in the printer driver.Press ▲ or ▼ to select Change Paper, and thenpress the OK button to remove the roll.1.Replace the paper with paper compatible forborderless printing.2.(→ , Removing the Roll from the Printer)(→"Removing the Roll Holder from Rolls," UserManual)(→ , Attaching the Roll Holder to Rolls)(→ , Loading Rolls in the Printer)The printer now starts printing the print job.Press ▲ or ▼ to select Stop Printing, and then pressthe OK button to stop printing.