88EPlaybackDATACODEDuring TAPE PLAY (VCR) mode, the data code can be displayed or hidden while the camcorder is inplay, slow or still mode.Camcorder data may be displayed as “– – –” during fast forward, rewind, reverse playback,forward and reverse ×2 playback.Press the DISPLAY/DATA CODE button. When using a cassette, press it while thecamcorder is in play, slow or still mode.• Press it once to display, once more to hide it.A data code containing the date and time the recording was made and other camcorder data(shutter speed and exposure settings) is automatically recorded on a special data section of thetape.• Only the date and time appear in the data code when using a memory card.To change the date and time combination, open the menu and select DISP.SET UP.Then select D/TIME SEL., set it to DATE, TIME or DATE & TIME and close the menu.Select whether you want the date, the time, or both to show up on your data code display.D/TIME SEL.• DATE & TIMEDISP.SET UP( 18)+ , + PLAY(VCR)CARDPLAY(VCR)TAPEDisplaying Date, Time and Camcorder Data (Data Code)Selecting Date/Time
