101EEditingConnecting the camcorder to your VCR or 8 mm video camera allows conversion of recordedanalog video and audio signals to digital signals in an instant. The digital signals can be output tothe other equipment with a DV terminal. The camcorder’s DV terminal works exclusively as anoutput terminal.• There may be cases where analog-digital conversion cannot be done properly, depending on thesignals output from the connected equipment.For example: Signals that include the copyright protective signal, or anomalous signals such asones that include ghost signals, etc.• You are recommended to use power from a household power source with a power adapter.• Do not operate with a cassette inserted to the camcorder.• Turn off the power of all equipment before performing connections.• Refer also to the instruction manuals of the other equipment connected.Digitally Outputting Analog Video and Audio Signals(Analog-Digital Converter)DVIN/OUTS-VIDEOVIDEORLAUDIOOUTPUTSTV-250N Stereo Video Cable: Signal flow: Signal flowS-150 S-video CableSignal flow :Side witharrowAbove illustration shows the connection using a S-video cable. You can also connect the yellowplug to the VIDEO terminal instead.
