132EUsing a Memory CardConnecting to a PC Using a USB CableYou can download still images from a memory card to a PC connected to the camcorder via theUSB interface. By using the supplied software, you can organize, store and print out still images.When printing still images, you can add titles and frames to them.Use the USB cable and the Canon Digital Video Solution Disk software supplied with thecamcorder.For details on how to connect the camcorder to a PC and install and operate thesoftware, refer to the Canon Digital Video Solution Disk instruction manual.• Refer also to your PC manual.“PC CONNECT [USB]” appears to indicate that the camcorder isconnected to the PC with an USB cable.Cautions:• Do not disconnect the USB cable while data is being transferred (while the camcorder’s cardaccess indicator is flashing). Doing so may damage the data on the memory.• The connection may not work properly depending on the specifications and settings of thesoftware and PC.• The image files on your memory card and the image files you have stored (downloaded) to thehard disk drive of your computer are your valuable, original image files. If you wish to use imagefiles on your computer, be sure to make copies of them first, and use the copied file, retainingthe original.Notes:While performing USB connection:• The buttons, excluding the POWER switch and TAPE/CARD switch on the camcorder cannot beused.IFC-300PCU USB cable: Signal flowPC CONNECT[USB]
