Canon Vixia HF R10 Instruction Manual

Also see for VIXIA HF R10: Software guide Instruction manual Reference guide Instruction manual Instruction manual

Contents

Canon Vixia HF R10 Instruction Manual Manual pdf 153 page image

Additional Information 153- Disconnect the USB cable and turn off the camcorder. After a short while, turn it on again andrestore the connection.- Connect the camcorder to a different USB port on the computer.- The camcorder will not be recognized while all photos are being deleted or all print orders arebeing removed.The printer is not working even though the camcorder and printer are connected correctly.- [USB Connection Type] is set to [DVD Burner]. Set it to [Computer/Printer] or to[Connect and Set].- Disconnect the USB cable and turn off the printer. After a short while turn it on again andrestore the connection.- Cannot connect to a PictBridge-compatible printer if the memory contains 2,500 photos ormore.The camcorder does not recognize the DW-100 DVD Burner even though it is connectedcorrectly.- [USB Connection Type] is set to [Computer/Printer]. Set it to [DVD Burner] or to[Connect and Set].After connecting the camcorder to a printer, the message [Busy] continues to appear on thescreen.- Disconnect the USB cable and restore the connection after a short while.Photos are not correctly printed.- You may not be able to print correctly, using a PictBridge-compatible printer, photos whosefile names have been changed or that were recorded, created, edited or changed usinganother device.Cannot save photos on my computer’s hard disk.- When the memory contains 2,500 photos (Windows)/1,000 photos (Mac OS) or more, youmay not be able to transfer photos to a computer. / Try using a card reader totransfer the photos on the memory card. To transfer the photos in the built-in memory, copythem to the memory card in advance ( 97).List of MessagesFollowing the list of messages for the camcorder you can find separatelists for print-related messages ( 161) and for messages that appearonly when using the optional DW-100 DVD Burner ( 160).Accessing the memory card. Do not remove the memory card.- You opened the memory card slot cover while the camcorder was accessing the memory cardor the camcorder started accessing the memory card as you opened the memory card slotcover. Do not remove the memory card until this message disappears.(in alphabetical order)COPYDownloaded From VideoCamera-Manual.com Manuals