Canon Vixia HF R10 Instruction Manual

Also see for VIXIA HF R10: Software guide Instruction manual Reference guide Instruction manual Instruction manual

Contents

Canon Vixia HF R10 Instruction Manual Manual pdf 100 page image

100 PhotosPrinting PhotosPrinting Photos (Direct Print)The camcorder can be connected to any PictBridge-compatibleprinter. You can mark in advance the photos you want to print and setthe desired number of copies as a print order ( 103).Canon printers: SELPHY printers of the CP, DS and ES series and PIXMAprinters marked with the PictBridge logo.Connecting the Camcorder to the Printer1 Set the camcorder to mode, single photo view./ You can select the photos in the built-in memory or on thememory card. Afterwards, move the zoom lever toward T to return tosingle photo view.2 Turn on the printer.3 Connect the camcorder to the printer using the supplied USBcable.• Connection . Refer toConnection Diagrams ( 109).• If the device selection screen appears, select [Computer/Printer] andpress .• appears and changes to .IMPORTANT• If continues to flash (for more than 1 minute) or if does notappear, the camcorder is not correctly connected to the printer. In suchcase, disconnect the USB cable and turn off the camcorder and theprinter. After a short while, turn them on again, set the camcorder tomode and restore the connection.• During the following operations, even if you connect a printer to thecamcorder it will not be recognized.- Deleting all photosOperating modes:4COPYDownloaded From VideoCamera-Manual.com Manuals