Canon Vixia HF R10 Instruction Manual

Also see for VIXIA HF R10: Software guide Instruction manual Reference guide Instruction manual Instruction manual

Contents

Canon Vixia HF R10 Instruction Manual Manual pdf 148 page image

148 Additional InformationRecordingPressing will not start recording.- You cannot record while the camcorder is writing previous recordings onto the memory (whilethe ACCESS indicator is on or flashing). Wait until the camcorder has finished.- The memory is full or it already contains the maximum number of scenes (3,999 scenes).Delete some recordings ( 53, 90) or initialize the memory ( 38) to free some space.The point where was pressed does not match the beginning/end of therecording.- There is a slight interval between pressing and the actual start/end of record-ing. This is not a malfunction.The camcorder will not focus.- Autofocus does not work on the subject. Focus manually ( 61).- The lens or Instant AF sensor is dirty. Clean the lens or sensor with a soft lens-cleaning cloth( 167). Never use tissue paper to clean the lens.When a subject flits across in front of the lens, the image appears slightly bent.- This is a phenomenon typical of CMOS image sensors. When a subject crosses very quickly infront of the camcorder, the image may seem slightly warped. This is not a malfunction.Changing between recording ( )/record pause ( )/playback ( ) takes longer thanusual.- When the memory contains a large number of scenes, some operations may take longer thanusual. Save your recordings ( 111) and initialize the memory ( 38).Movies or photos cannot be recorded properly.- This may occur as movies and photos are recorded/deleted over time. Save your recordings( 111) and initialize the memory ( 38).After using the camcorder for a long time, it becomes hot.- The camcorder may become hot after using it continuously for long periods of time; this is nota malfunction. If the camcorder becomes unusually hot or it becomes hot after using it onlyfor a short while, it may indicate a problem with the camcorder. Consult a Canon Service Cen-ter.PlaybackCannot add scenes to the playlist.- The playlist can contain a maximum of 999 scenes. If the playlist includes scenes recorded inFXP mode, the maximum number of scenes in the playlist may be less than 999.- You may not be able to add scenes to the playlist if they were recorded or edited usinganother device.- The memory is full. Delete some recordings ( 53, 90) or initialize the memory ( 38) tofree some space.START/STOPSTART/STOPSTART/STOPCOPYDownloaded From VideoCamera-Manual.com Manuals