Canon Vixia HF R10 Instruction Manual

Also see for VIXIA HF R10: Software guide Instruction manual Reference guide Instruction manual Instruction manual

Contents

Canon Vixia HF R10 Instruction Manual Manual pdf 152 page image

152 Additional Information- The folder and file numbers have reached their maximum value. Set [Photo Number-ing] to [Reset] and insert a new memory card.Cannot upload files using an Eye-Fi card.- Files cannot be uploaded when [Eye-Fi Communication] is set to [Off] (whenappears on the screen). Change this setting to [Automatic].- Opening the LCD panel may improve wireless signal conditions.- During wireless transfer, transfer may stop in situations such as when the camcorderbecomes hot or wireless signal conditions worsen ( appears on the screen). Turn off thecamcorder and let it cool down. Alternatively, perform wireless transfer in a place with goodsignal conditions.- Contact the card manufacturer’s customer care.Connections with External DevicesVideo noise appears on the TV screen.- When using the camcorder in a room where a TV is located, keep a distance between thecompact power adapter and the power or antenna cables of the TV.Playback looks fine on the camcorder but there is no image on the TV screen.- The video input on the TV is not set to the video terminal to which you connected the cam-corder. Select the correct video input.There is no sound from the TV.- When connecting the camcorder to an HDTV using the CTC-100/S Component Cable, makesure to connect also the audio connections using the white and red plugs of the STV-250NStereo Video Cable.The camcorder is connected using the optional HTC-100 HDMI Cable, but there is no picture orsound from the HDTV.- Disconnect the HTC-100 HDMI Cable and then restore the connection or turn the camcorderoff and then on again.The camcorder is connected using the optional HTC-100 HDMI Cable, but HDMI-CEC does notwork (cannot play back using the TV’s remote control).- Disconnect the HTC-100 HDMI cable and turn off the camcorder and the TV. After a shortwhile turn them on again and restore the connection.- [Control for HDMI] is set to [Off]. Set it to [On].- HDMI-CEC is not activated on the connected TV. Activate this function on the TV.- Even with TV sets compatible with HDMI-CEC the range of functions available differs depend-ing on the type of TV. Refer to the instruction manual of the connected TV.The computer does not recognize the camcorder even though the camcorder is connectedcorrectly.- [USB Connection Type] is set to [DVD Burner]. Set it to [Computer/Printer] or to[Connect and Set].COPYDownloaded From VideoCamera-Manual.com Manuals