Canon PIXMA TR4500 Series Online Manual

Also see for PIXMA TR4500 Series: Getting started Getting started Online manual Online manual

Contents

Canon PIXMA TR4500 Series Online Manual Manual pdf 405 page image

Poor Quality Fax ReceivedCheck1 Check scan settings of sender's fax device.Ask the sender to adjust the scan settings of the fax device.Check2 Is ECM RX set to OFF?Select ON for ECM RX in Adv. communication in Adv. FAX settings under Fax settings.If ECM RX is enabled, the sender's fax device resends the fax after correcting errors automatically.Fax settingsCheck3 Is sender's original document or scanning area of sender's fax device dirty?The image quality of the fax is mainly determined by the sender's fax device. Contact the sender and ask thesender to check whether the scanning area of the fax device is dirty.Check4 Is ECM transmission/reception enabled although the line/connection is poor, oris the sender's fax device compatible with ECM?• Select ON for ECM RX in Adv. communication in Adv. FAX settings under Fax settings.Fax settings• Contact the sender and ask the sender to check whether the fax device is set to enable ECM transmission.If the sender's or recipient's fax device is not compatible with ECM, the fax will be sent/received withoutautomatic error correction.• Reduce the reception start speed on RX start speed in Adv. communication in Adv. FAX settings underFax settings.Fax settingsCheck5 Did you confirm paper and print quality settings?Printout Results Are Unsatisfactory405