Cleaning the Print HeadsThe print head cleaning function allows you to clear up clogged print head nozzle. Perform print headcleaning if printing is faint or a specific color fails to print, even though there is enough ink.Cleaning1. Select Utilities from Remote UI2. Click CleaningBefore running the cleaning, check the following items:Check whether the printer is on and open the printer's paper output cover.Check the following items for each ink. Then, if necessary, perform Cleaning.• Is there ink remaining in the cartridge?• Did you push in the ink cartridge completely until you heard a clicking sound?• If the orange tape is there, has it been peeled off completely?Any remaining tape will hinder ink output.• Did you install the ink cartridges in their correct positions?3. Execute cleaningClick Yes.Print head cleaning starts.4. Complete cleaningNext, the message for nozzle check pattern printing is displayed.5. Check the resultsTo check whether the print quality has improved, click Yes. To cancel the check process, click No.If cleaning the head once does not resolve the print head problem, clean it once more.Important• Cleaning consumes a small amount of ink.Cleaning the print head frequently will rapidly deplete your printer's ink supply. Consequently, performcleaning only when necessary.Deep cleaningDeep cleaning is more thorough than cleaning. Perform deep cleaning when two Cleaning attempts donot resolve the print head problem.1. Select Utilities from Remote UI116
