Setting Telephone Line TypeBefore using your printer, make sure you set the correct telephone line type for your telephone line. If youare unsure of your telephone line type, contact your telephone company. For xDSL or ISDN connections,contact the telephone company or service provider to confirm your line type.Important• For users in ChinaAfter plugging the power cord and turning on the printer, the telephone line type is selectedautomatically. However, if the printer is connected to the control device such as an xDSL modem orterminal adapter, the telephone line type may not be selected correctly.In this case, set the line type manually.For details on how to set the Telephone line type manually in China:Setting the Telephone Line Type Manually in ChinaNote• Telephone line type will not appear in countries or regions where Rotary pulse is not supported.• You can print USER'S DATA LIST to check the current setting.Summary of Reports and Lists1. Check that printer is turned on.2. Press the Setup button.The Setup menu screen is displayed.3. Select Fax settings, then press the OK button.4. Select FAX user settings, then press the OK button.5. Select Telephone line type, then press the OK button.6. Select a telephone line type, then press the OK button.Rotary pulseSelect when your telephone line type is pulse dialing.Touch toneSelect when your telephone line type is tone dialing.Note• The (asterisk) on the LCD indicates the current setting.259
