CHAPTER 9 INSTALLATIONCOPYRIGHT © 1999 CANON INC. CANON NP6512/6612/7120/7130/7130F REV.0 AUG. 1999 PRINTED IN JAPAN (IMPRIME AU JAPON)9-22Work Checks and remarksStepFit the shipping attachments [1] and [2] de-tached in step 5 back to the machine.8Shipping attachment [1]Shipping attachment [2]Tape the machine’s top unit in place to pre-vent it from opening.9Place A4/LGL copy paper on the copyboardglass, and close the copyboard cover; then,tape it in place. (Copyboard type only)10Raise the ADF. Then, place two parts used aspackaging so that they fit closely around bothsides and the front of the ADF, as shown in thediagram, and secure them with tape. (ADFtype only)Gently lower the ADF and secure the mainunit by taping in eight places, as shown in thediagram. (ADF type only)Pack the machine, using the original packingmaterial and box.Or tape the machine’s top in place so that itwill not open while in transit.11
