CHAPTER 5 PICK-UP/FEEDING SYSTEMCOPYRIGHT © 1999 CANON INC. CANON NP6512/6612/7120/7130/7130F REV.0 AUG. 1999 PRINTED IN JAPAN (IMPRIME AU JAPON) 5-21Figure 5-214Figure 5-215[1][1][2]Pickupgear unitB. Multifeeder Assembly1. Removing the Multifeeder Unit1) Open the right door.2) Remove the two screws [1], and detachthe multifeeder unit [2].Caution:When mounting the multifeeder unit,perform the following first:1) Turn on the power switch; then, se-lect the multifeeder, and press theCopy Start key.2) When the pickup gear unit has movedas far as it can, turn off the powerswitch.3) Mount the multifeeder unit; then,make a copy using the multifeeder.
