CHAPTER 7 EXTERNALS/AUXILIARY MECHANISMSCOPYRIGHT © 1999 CANON INC. CANON NP6512/6612/7120/7130/7130F REV.0 AUG. 1999 PRINTED IN JAPAN (IMPRIME AU JAPON)7-14Figure 7-312Figure 7-313[6][7][6]Pickupgear unit6) While freeing the five claws [6], detachthe front lower cover [7].Caution:When mounting the multifeeder unit, besure to perform the following first:1) Turn on the power switch; then, se-lect the multifeeder as the source ofpaper, and press the Copy Start key.2) When the pickup gear unit assemblyhas moved to its upper limit, turn offthe power switch.3) Mount the multifeeder, and make onecopy using it as the source of paper.5) Remove the two screws [5] from thescrew plate found at the bottom of the ma-chine.[5]Figure 7-311
