Safety PrecautionsChoosing a location• Do not install the machine in a location that is unstable or subject to excessive vibration.• Do not install the machine in locations that are very humid or dusty, in direct sunlight, outdoors, orclose to a heating source.To avoid the risk of fire or electric shocks, use the machine under the operating environment specifiedin the On-screen Manual.• Do not place the machine on a thick rug or carpet.• Do not place the machine with its back attached to the wall.Power supply• Ensure that the area around the power outlet is kept clear at all times so you can easily unplug thepower cord if necessary.• Never remove the plug by pulling on the cord.Pulling the cord may damage the power cord, leading to possible fire or electrical shock.• Do not use an extension lead/cord.Working around the machine• Never put your hands or fingers in the machine while it is printing.• When moving the machine, carry the machine at both ends. In case the machine weighs more than14 kg, it is recommended to have two people lifting the machine. Accidental dropping of the machinecauses injury. For the machine's weight, refer to the On-screen Manual.• Do not place any object on the machine. Especially do not place metal objects (paper clips, staples,etc.) or containers of flammable solvents (alcohol, thinners, etc.) on top of the machine.• Do not transport or use the machine on a slant, vertically or upside-down, as the ink may leak anddamage the machine.Working around the machine (For the multifunction printer)• When loading a thick book on the Platen Glass, do not press hard on the Document Cover. ThePlaten Glass may break and cause injury.Print Heads/ink tanks and FINE Cartridges• Keep ink tanks out of the reach of children. In case ink* is accidentally licked or swallowed, rinse outmouth or give one or two glasses of water to drink. If irritation or discomfort occurs, obtain medicaladvice immediately.* Clear Ink contains nitrate salts (For models containing Clear Ink).• In case ink gets in contact with eyes, rinse with water immediately. In case ink gets in contact withskin, wash with soap and water immediately. If irritation to eyes or skin persists, obtain medical adviceimmediately.• Never touch the electrical contacts on a Print Head or FINE Cartridges after printing.The metal parts may be very hot and could cause burns.• Do not throw ink tanks and FINE Cartridges into fire.• Do not attempt to disassemble or modify the Print Head, ink tanks, and FINE Cartridges.46
