Canon MX470 series Online Manual

Also see for MX470: User manual Getting started User guide Manual Setting up

Contents

Canon MX470 series Online Manual Manual pdf 192 page image

Changing the Settings in the Wired LAN SheetNote• This screen is not available depending on the printer you are using.• Activate the wired LAN setting of the printer to change the settings in the Wired LAN sheet.1. Start up IJ Network Tool.2. Select the printer in Printers:.3. Click the Configuration... button.4. Click the Wired LAN button.5. Change the settings or confirm.Click OK after changing configuration. A screen is displayed asking you for confirmation before thesettings are sent to the printer. If you click OK, the settings are sent to the printer and the TransmittedSettings screen is displayed.1. TCP/IP Setting:Sets the IP address of the printer to be used over the LAN. Specify a value appropriate for yournetwork environment.Get IP address automaticallySelect this option to use an IP address automatically assigned by a DHCP server. DHCPserver functionality must be enabled on your router.Use following IP addressIf no DHCP server functionality is available in your setup where you use the printer or youwant to use a particular IP address, select this option to use a fixed IP address.192