Reducing or Enlarging a CopyYou can specify the magnification optionally or select the preset-ratio copying or fit-to-page copying.In the copy mode, press the Menu button, use the button to select Enlarge/Reduce, then press theOK button.Use the button to select the reduction/enlargement method, then press the OK button.Ex:Note• Some of the reduction/enlargement methods are not available depending on the copy menu.• Preset ratioYou can select one of the preset ratios to reduce or enlarge copies.Use the button to select a preset ratio to match the size of your original document and printingpaper, then press the OK button.• MagnificationYou can specify the copy ratio as a percentage to reduce or enlarge copies.Use the (-) (+) button or the Numeric buttons to specify the reduction or enlargement ratio (25 -400%), then press the OK button.Note• Press and hold the (-) (+) button to quickly advance through the ratios. For details, see Keyrepeat.• Fit to pageThe machine automatically reduces or enlarges the image to fit the page size.Note• When you select Fit to page, the document size may not be detected correctly depending on theoriginal. In this case, select Preset ratio or Magnification.• When Fit to page is selected, load the document on the platen glass.300
