Setting Items for CopyingYou can change the copy settings such as the page size, media type, and intensity.Press the Menu button, use the button to select a setting item, then press the OK button.Use the button to adjust each setting item, then press the OK button. The next setting item isdisplayed.The LCD returns to the Copy standby screen when all the settings are complete.Note• The * (asterisk) on the LCD indicates the current setting.• Some settings cannot be specified in combination with the setting of other setting items or the copymenu.• The settings of the page size, media type, etc. are retained even if the machine is turned off.• Enlarge/ReduceSelect the reduction/enlargement method.Reducing or Enlarging a CopyEx:Note• This setting item is displayed under the following conditions.• When standard copying is selected• When Borderless copy is selected for Special copy• Copy intensityChange the intensity.Ex:Note• If you select Auto adjust, load the original on the platen glass.• If you select Manual adjust, use the button to decrease the intensity or the button toincrease it.• Page sizeSelect the page size of the loaded paper.Ex:298
