Setting Items for Scanning Using the Operation Panel of theMachineYou can change the scan settings such as the scan size, resolution, or data format.Use the button to select a setting item, then press the OK button.Use the button to adjust each setting item, then press the OK button. The next setting item isdisplayed.Note• The * (asterisk) on the LCD indicates the current setting.• The scan setting cannot be specified under the following conditions:• When Auto scan is selected for Document type to forward the scanned data to the computer• When you forward the scanned data to the computer using WSD (one of the network protocolssupported in Windows 8, Windows 7, and Windows Vista)• Some setting items cannot be specified in combination with other setting items, the document type, orthe destination to save the data.• The settings of the scan size, resolution, and data format are retained even if the machine is turned off.• When you forward the scanned data to the computer, you can specify the destination and file nameusing Canon IJ Scan Utility.Settings Dialog• If you scan originals from the computer, you can scan with advanced settings. For details on scanningfrom the computer:Scanning Photos and Documents• Scan sizeSelect the size of the original.Ex:If you select Auto scan(A) -Singl, the machine detects the page size automatically and starts scanning.If you select Auto scan(A) -Multi to save to the computer, you can scan several originals at a time.Note• When Legal is selected, load the original in the ADF.• When 4"x6", 10x15, 5"x7", 13x18, or Auto scan(A) -Singl is selected, load the original on theplaten glass.• Some of setting items are not available depending on the country or region of purchase.• Data formatSelect the data format of the scanned data.Ex:415
