The setting item which cannot be selected is displayed grayed out.For details on the setting items for Photo copy, see Copying Photos.• Some settings cannot be specified in combination with the setting of other setting item or the copymenu. If the setting which cannot be specified in combination is selected, and Error details aredisplayed on the touch screen. In this case, tap on the upper left on the touch screen to confirmthe message, then change the setting.• The settings of the page size, media type, etc. are retained even if the machine is turned off.• When copying starts in the copy menu that is not available with the specified setting, The specifiedfunction is not available with current settings. is displayed on the touch screen. Change thesetting, following the on-screen instructions.1. Magnif. (Magnification)Specify the reduction/enlargement method.Reducing or Enlarging a Copy2. IntensitySpecify the intensity.A. Tap to activate/deactivate automatic intensity adjustment.When ON is selected, the intensity is adjusted automatically according to the originals loadedon the platen glass.B. Drag to specify the intensity.C. Tap to confirm the intensity setting.3. Page sizeSelect the page size of the loaded paper.4. Type (Media type)Select the media type of the loaded paper.5. Print qlty (Print quality)Adjust print quality according to the original.429
