*3 Printed in 35 mm Film Style Layout (Contact Printing Layout). Available only with a Canon-brandPictBridge (Wireless LAN) compliant device. (May not be available with some Canon-brandPictBridge (Wireless LAN) compliant devices.)Print date &file no.Default (Off: No printing), Date, File No., Both, OffImageoptimizeDefault (Selections based on the machine setting), On (Auto photo fix)*1, Off, Red-Eye*2*1 The scene or person's face of a shot photo is recognized and the most suitable correction for eachphoto is made automatically. It makes a darkened face by backlight brighter to print. It also analyzes ascene such as scenery, night scene, person, etc. and corrects each scene with the most suitablecolor, brightness, or contrasts automatically to print.*2 Can be selected only on certain Canon-brand PictBridge (Wireless LAN) compliant devices. (Maynot be selected depending on the device.)Trimming Default (Off: No trimming), On (follow the camera's setting), OffSettings on the MachineYou can change the PictBridge (Wireless LAN) print settings from the PictBridge print settings screen.Set the print settings to Default on the PictBridge (Wireless LAN) compliant device when you want to printaccording to the settings on the machine.This section describes the procedure to display the PictBridge print settings screen.1. Make sure that the machine is turned on.2. Flick the HOME screen, then tap Setup.Using the Operation Panel3. Tap Device settings.4. Tap PictBridge print settings.5. Check the message that is displayed, then tap OK.The PictBridge print settings screen is displayed.For details on the setting items:PictBridge print settings419
