Using On Hook Dial FunctionFollow the procedure below to send faxes with the on hook dial function.Important• It may be possible that faxes will reach unintended recipients due to the misdialing or incorrectregistration of fax/telephone numbers. When you send important documents, we recommend that yousend them after speaking on the telephone.Sending Fax after Speaking on Telephone• With manual transmission, you cannot use the platen glass to load documents. Load the documents inthe ADF.When loading document on the platen glass, send a fax with automatic transmission.Sending Faxes by Entering Fax/Telephone NumberNote• You can use the on hook dial function only when Hook key setting in Security control under FAXsettings is set to Enable.Security control• For details on the basic sending operations:Sending Faxes by Entering Fax/Telephone Number1. Make sure that printer is turned on.2. Load documents in ADF.3. Select FAX on HOME screen.Using the Operation PanelThe Fax standby screen is displayed.4. Change send settings as necessary.Setting Items for Sending Faxes5. Press center Function button.6. Specify a recipient.Specify the recipient with the one of the following methods.• By specifying with the recipient registered to the printer:Select the registered recipient by pressing the left Function button.Sending Fax to Registered Recipient931
