Loading Based on UseLoad originals correctly for how they will be used. Originals loaded incorrectly may cause scanningproblems.Align Originals with the alignment mark• When loading originals to copy or fax• When selecting Doc.type > Document or Photo in Scan and specifying a standard size (such as A4/Letter) in Scan size• When using a computer to:◦ Scan documents, magazines, or newspapers◦ Specify a standard size (such as A4/Letter) to scan originalsPlace the original face-DOWN on the platen glass and align it with the alignment mark ( ). Thediagonally striped area is outside the scanning area.Important• The striped area (A, 0.04 inch (1 mm) from the edges of the platen glass) is outside the scanningarea.Center One Original on the platen glass• When selecting Doc.type > Photo in Scan and specifying Scan size > Auto scan to scan oneoriginalLoad the original face-DOWN at least 0.4 inch (1 cm) from the edges of the platen glass. The diagonallystriped area is outside the scanning area.187