Device user settingsSelect this setting item from Device settings on Setup.Important• The administrator password is required to change settings if it is enabled for changing settings usingthe operation panel.• Date/time settingSets the current date and time.For more on the procedure:Setting Sender Information• Date display formatSets the format of dates displayed on the LCD and printed on sent faxes and photos.Note• When ON is selected for Print date on the print settings screen in printing from a USB flash drive,the shooting date is printed in the date display format you selected.Setting Items for Photo Printing Using Operation Panel• Daylight saving time settingEnables/disables the summer time setting. If you select ON, you can select additional sub-settings. Thissetting may not be available depending on the country or region of purchase.◦ Start date/timeSets the date and time that summer time starts.Month: Specify the month.Week: Specify the week.DOW: Specify the day of the week.The screen to set the shift time to start summer time will be displayed after specifying the itemsabove and pressing the OK button.After specifying the shift time and pressing the OK button, you can specify the end date/time.◦ End date/timeSets the date and time that summer time ends.Month: Specify the month.Week: Specify the week.DOW: Specify the day of the week.The screen to set the shift time to end summer time will be displayed after specifying the itemsabove and pressing the OK button.Specify the shift time and press the OK button.299
