Changing the Paper SettingsThis machine prints received faxes to paper loaded in the machine beforehand. You can use the operationpanel to change the paper settings for printing faxes. Make sure that the settings are appropriate for theloaded paper.Important• If the size of loaded paper is different from that specified in the paper size setting, the received faxesare stored in the machine's memory and Check the page size and select . is displayed on theLCD. In this case, load the same size of paper as that specified in the paper size setting, then press theOK button.You can also press the Stop button to close the message and print the stored documents in themachine's memory later.Printing a Document in Machine's Memory• If no paper is loaded, or paper has run out while printing is in progress, the received faxes are stored inthe machine's memory and the error message for no paper is displayed on the LCD. In this case, loadpaper and press the OK button.You can also press the Stop button to close the message and print the stored documents in themachine's memory later.Printing a Document in Machine's MemoryNote• If the sender sends a document that is larger than Letter-size or Legal-size, such as 11 x 17 inches, thesender's machine may send the fax automatically reduced in size or divided, or send only a part of theoriginal.1. Make sure that the machine is turned on.2. Select FAX on the HOME screen.LCD and Operation PanelThe Fax standby screen is displayed.3. Use the button to select Function list, then press the OK button.The Function list screen is displayed.4. Use the button to select FAX paper settings, then press the OK button.The FAX paper settings screen is displayed.5. Specify the settings.Use the button to change the setting item and use the button to change the setting.635
