Administrator password settingImportant• This setting item is for the administrator.You can specify or disable the administrator password.Specifying the administrator password requires you to enter the password to change the machine settings orconnection settings.Entering the administrator password is required to change the setting items in the following menus.• ECO settings• Quiet setting• Web service setup• FAX settings• LAN settings• Device user settings• Language selection• Firmware update• Administrator password setting• Operation restrictions• Reset settingWhen the confirmation screen to specify the administrator password is displayed, select Yes, then press theOK button. When the message is displayed, press the OK button.The screen to show the range where the administrator password is valid is displayed.Select the range, then specify the administrator password (0 to 32 alphanumeric characters).Remote UI/Network ToolEntering the administrator password is required to change the setting items using the Remote UI or IJNetwork Tool.LCD/Remote UI/Network ToolEntering the administrator password is required to change the setting items using the operation panel ofthe machine, the Remote UI, or IJ Network Tool.262
