Reset settingImportant• This setting item is for the administrator.Reverts all settings you made to the machine back to the default. However, some data may not be changed,depending on the current usage state of your machine.Important• Depending on the setting item, it is necessary to perform connection or setup again after you havereverted the setting back to the default.• Web service setup onlyReverts the Web service settings back to the default.• LAN settings onlyReverts the LAN settings other than the administrator password back to the default.After resetting, perform setup again as necessary.• Telephone number onlyReverts the telephone/fax number settings to default.• Settings onlyReverts the settings such as the paper size, media type, or other setting items back to the default. TheLAN settings and the telephone/fax number are not reverted.• Device info sending setting onlyReverts only the device information sending settings.• FAX settings onlyReverts the fax settings to the default. Disconnect the telephone line from the machine before you revertthis setting item.After resetting, perform setup again as necessary.• Reset allReverts all settings you made to the machine back to the default. The administrator password specifiedfor the machine reverts to the default setting.After resetting, perform setup again as necessary.Note• You cannot change the following setting items back to the default:• The language displayed on the LCD• The current position of the print head• The country or region selected for Country or region• Total use of copying, scanning, and faxing recorded in Records of useYou can delete the registered user's name or telephone number following the procedure below.264
