• Pause time settingsSets the length of pause time for each when you enter "P" (pause).• TTI positionSelects the position of the sender information (outside or inside the image area).• Remote RXEnables/disables remote reception.If you select ON, you can specify the remote reception ID.Remote Reception• Color transmissionWhen faxing color documents using the ADF, selects whether to convert them into black & white dataif the recipient's fax machine does not support color faxing.If you select Disconnect, the machine does not send color documents when the recipient's faxmachine does not support color faxing.RX image reductionEnables/disables automatic reduction of incoming faxes so that they fit in the selected paper.If you select ON, you can select the image reduction direction.• Adv. communication settings◦ ECM TXSelects whether to send faxes in Error Correction Mode (ECM).Transmission/Reception of Faxes Using ECM◦ ECM RXSelects whether to receive faxes in Error Correction Mode (ECM).Transmission/Reception of Faxes Using ECM◦ TX start speedSelects the fax transmission speed.The fax transmission start speed will be faster as the value is bigger.When the telephone line condition or connection is poor, selecting a lower transmission startspeed may solve transmission problems.◦ RX start speedSelects the fax reception speed.The fax reception start speed will be faster as the value is bigger.When the telephone line condition or connection is poor, selecting a lower reception start speedmay solve reception problems.Auto print settings• Received documentsSelects whether to print the received fax automatically when receiving a fax.249