54Reviewing an Image Right after ShootingRight after a shot is taken, the image appears in the LCD monitor for 2seconds. In addition, the images will keep on displaying regardless of thereview duration setting if one of the following operations is performed.• Keeping the shutter button pressed after a shot.• Pressing the SET button while the image is displayed on the LCD monitor.Press the shutter button halfway to stop displaying it so that you can shoot thenext frame.• You can do the following while the image is displayed.- Display the image’s detailed information (p. 33).- Erase the image (p. 105).- Magnify the image in the display (When pressing the SET buttonwhile the image is displayed) (p. 90).Changing the Review DurationThe default review time is 2 seconds. The review function can be set to [Off] orchanged to any time in the range of 2 to 10 seconds in one-second increments.1 In the (Rec.) menu, select .See Selecting Menus and Settings (p. 42).2 Use the or button to selectreview setting and press the MENUbutton.• With the [Off] option, the image will notautomatically display.• In the [2 sec.] to [10 sec.] range, theimage will continue to display for thespecified time even if the shutter buttonis released.• Holding the shutter button down after ashot holds the image in the displayregardless of the setting.
