92You can change the look of an image when shooting. However, depending onshooting conditions the image may become coarse, or the colors may notcome out as expected.Color AccentYou can choose to retain a single color and change the rest to black and whitein a composition.Choose T.● Follow Steps 1 – 2 on p. 61 to choose T.Press the n button for morethan one second. The unchanged image and the ColorAccent image will alternately display.● The color for default settings is green.Specify the color.● Position the center frame so it is filled withthe color you want and press the q button. The specified color will be recorded.Specify the range of colors.● Press the op buttons or turn the  dialto change the range of colors to beretained.● Choose a negative value to limit the rangeof colors. Choose a positive value toextend the range of colors to similar colors.● Pressing the n button accepts thesetting and restores the shooting screen.Changing the Color and ShootingRecorded colorUsing the flash may cause unexpected results in this mode.Downloaded From camera-usermanual.com Canon Manuals
